• Ultrasonic flowmeter measurement principle

    Ultrasonic flowmeter measurement principleAll TNF ultrasonic flowmeters measure flow by the transit time difference method. The jet lag method is based on a simple physical fact. Imagine two boats cro

    2020-01-02 凯崎 83

  • How to choose the electromagnetic flowmeter?

    Confirm the norminal Size, means the outside pipe diameter;Choose the suitable Liner of magnetic flow meter based on the chemical property of liquid;Choose the suitable electrode m

    2019-11-01 凯崎 114

  • Electromagnetic flowmeter installed upstream of the control valve

    Firstly, the electromagnetic flowmeter must be full to measure the accurate flow. The upstream of the flow regulating valve is installed to avoid the error caused by the flowmeter of the electromagnetic flowmeter when the flow regulating valve is not full. Here to clarify a concept, the control valve is not the valve, the valve should be added before and after the flow meter and control valve. Generally speaking, if there are both flow meters and control valves in the pipeline, basically the flowmeter is used to measure the flow, and then the control valve is used to control the flow. There is no control valve in the front, the flow meter is in the back, there is. The advantage of this is that in many cases, the flow meter is sensitive to pressure changes, the control valve is added to the front, the pressure drop is mostly on the valve, and the subsequent flow measurement is stable. But the problem is that the measurement is lagging behind the control, that is to say, the flow measured by the flowmeter is out of control, and it flows to the back, which is unfavorable in control. Therefore, in most cases, the control valve should be placed behind the sensor.

    2019-05-28 158

PgUp1PgDn Go to
电话咨询
邮件咨询
在线地图
QQ客服